Car Docking Kit KS-K6002/KS-K6001 INSTALLATIONS LVT1195-001A...
INFORMATION (Only for KS-K6002) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the manufacturer for compliance could void the user’s authority to operate the equipment.
Take the following precautions to prevent traffic accidents and avoid personal injury: • Installation must be performed according to this installation manual. JVC is not responsible for issues arising from installations not performed according to the procedures in this manual.
Adapter (250 V/3A) For the latest information about this and other JVC PnP products, visit the JVC Web site at <http://www.jvcmobile.com>. If anything is missing or damaged, or if your Car Docking Kit fails to operate, notify your shipper immediately. It is recommended that you keep the original packaging in case you need to ship your Car Docking Kit in the future.
Installation in Your Car CAUTION: Do not put JVC PnP in the car docking cradle until you have completed the installation. Determine where you want to mount JVC PnP. • Do not install JVC PnP where it may obstruct your view through the windshield or your view of your car’s indicator displays.
Installation in Your Car (Continued) CAUTION: Do not plug the cigarette lighter adapter into he cigarette lighter until you have completed the installa- tion. Plug the cigarette lighter adapter into the back of the cradle—DC 12V. For KS-K6001: A If your car stereo does not have a line input (LINE IN or AUX)...
Only for KS-K6002: An optional hard-wired FM transmitter—FM Switching Box Assembly (Parts No. 112C3159) is available. By connecting this Assembly between the FM OUT terminal of the cradle and the antenna input terminal of your car stereo, you can obtain stable and reliable transmission/reception. B If your car stereo has a line input (LINE IN or AUX)...
Finding the Best Antenna Mounting Location Temporarily plug the antenna into the back of the cradle—SAT (MAIN) until it is firmly seated. Find an antenna location on a metal surface of your car—at least 30 cm × 30 cm (12 inches × 12 inches), and at least 15 cm (6 inches) from a window.
Slide JVC PnP all the way into the cradle so that the connector at the bottom of the unit makes proper contact in the cradle. Press the (POWER) button to turn on your JVC PnP. • If your JVC PnP has been properly connected and the antenna is receiving the SIRIUS signal, you will hear audio.
Running the Antenna Cable Before routing the antenna cable, confirm that the antenna is mounted in a good location. Turn off your JVC PnP then remove it from the cradle. Unplug the cigarette lighter adapter from the cigarette lighter and the antenna from the cradle.
• Route the cable from the lowest point of the rear window. Take advantage of any existing cable channels or wiring conduits. • For SUVs, minivans & 5-door vehicles, bring the cable into the car under the rubber molding for the tailgate, and continue under the interior trim.