The Connection Panel - Samsung 5 Series Installation Manual

1
2
3
4
5
✎
Whenever you connect an external device to your TV, make sure that power on the TV and the device is turned off.
✎
When connecting an external device, match the color of the connection terminal to the cable.
PILLOW OUT: Connect the pillow speaker. Refer to page 8.
1
USB (5V 0.5A) / CLONING, (HDD 5V 1A) / CLONING
2
– Connector for software upgrades and Media Play, etc.
– Service connection.
3 LAN: Connect to a wired LAN using CAT 5 cable.
COMPONENT IN / AV IN1
4
– Connect audio cables to "R-AUDIO-L" on your TV and the other ends to corresponding audio out jacks on an A/V
device.
– Connects Component video / audio.
– The COMPONENT IN
– Connect component video cables (optional) to the component jacks ("P
other ends to corresponding component video out jacks on a DVD player.
– If you wish to connect both the Set-Top Box and a DVD player, you should connect the Set-Top Box to the DVD and
connect the DVD to the component jacks ("PR", "PB", "Y") on your TV.
– The PR, PB and Y jacks on your component devices (DVD) are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr.
– Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of the TV set and the other ends to corresponding
audio out jacks on the external device.
– When connecting to
(Yellow).
AUDIO OUT: Connects to the audio input jacks on an Amplifier/Home Theater.
5
PC IN: Connect to the video output jack on your PC.
6

The Connection Panel

6
jack is also used as the
IN, the color of the
AV AV IN [Y/VIDEO]
7 8
VIDEO 1 jack.
jack (Green) does not match the color of the video cable
@"
!
0
9
", "P ", "Y") on the rear of your TV and the
R B
!
2
#
5
English