Setting The Hospital Option Data - Samsung 5 Series Installation Manual

To let you control how the TV functions when in Hospital mode, the TV has two Hospital mode menus, the Stand-alone mode
menu and the Interactive mode menu. The menu items that differ between the menus are listed below,
Items in the Standalone menu only:
– SIRCH
Items in the Interactive menu only:
– SI Vendor
All other items appear in both menus.
To access the menus, press
After a menu appears, follow these general directions to navigate and change values:
– Use the Up and Down arrow buttons on the standard remote to move from menu item to menu item.
– Press the Enter or Left or Right arrow buttons to select a menu item. The screen displays that menu item only.
– Press the Left or Right arrow button to change a value. The Right arrow button increases numerical values. The Left
arrow button decreases numerical values.
– When the screen is displaying one menu item, you can press the Up or Down arrow button to display the next or
previous menu item.
– Press the Return button to exit a menu item and return to the Main menu.
– To exit a Hospital mode menu, turn off the TV, and then turn it on again. Any changes you made are saved except
changes to SI Vendor. For changes to SI Vendor, you must turn the TV off, wait until the Standby light glows steadily,
then unplug the TV, wait for the Standby light to go off, and then plug the TV in again.
Hospitality Mode
SI Vendor
Power On
Channel
Menu OSD
Operation
Clock
Music Mode
External Device
External Source
Pillow Speaker
Eco Solution
Logo/Message
Cloning
SIRCH
To change menus, follow these steps:
1. Highlight the Hospitality Mode menu item in the top left corner of the menu.
2. Press the left or right arrow button on the Samsung remote. Only the Hospitality Mode menu item is displayed.
3. Press the left or right arrow button to change the Hospitality Mode item from Standalone to Interactive or from Interactive
to Standalone.
4. Press the Return or Menu button on the remote. The entire menu re-appears with your selection displayed in the
Hospitality Mode field.
✎
After you have set the values in one TV, you can clone those values to multiple TVs. See USB Cloning on page 20.

Setting the Hospital Option Data

→ 1 → 1 → 9 →
MUTE
Standalone Network
OFF Service
Above: The Hospital mode menu.
ENTER on your Samsung remote.
13
English