Table of Contents
Advertisement
46
Troubleshooting
EN
Problem
The POWER/CHARGE
lamp on the camcorder
does not light during
charging.
The tape is moving, but
there is no picture.
Blocks of noise appear
during playback, or
there is no playback
picture and the screen
becomes blue.
The remote
control does not work
The colour of Snapshot
looks strange.
Possible Cause
• Charging is diffi cult in places
subject to extremely high/low
temperatures.
• The battery pack is not attached
fi rmly.
• Your TV has AV input terminals,
but is not set to its VIDEO mode.
• The cassette holder cover is open.
• "REMOTE" is set to "OFF".
• The remote control does not point
at the remote sensor.
• The remote control batteries are
exhausted.
• The light source or the subject
does not include white. Or there
are various different light sources
behind the subject.
Remedy
To protect the battery, it is
recommended to charge it in
places with a temperature of 10°C
to 35°C. (
48)
Detach the battery pack once
again and re-attach it fi rmly. (
Set the TV to the mode or channel
appropriate for video playback.
(
41)
Close the cassette holder cover.
(
18)
Clean the video heads with an
optional cleaning cassette.
(
4)
Set "REMOTE" to "ON" (
Point at the remote sensor
(
11).
Replace the batteries with fresh
ones (
11).
Find a white subject and compose
your shot so that it also appears
in the frame. (
38)
16)
33).
Advertisement
Table of Contents
