Troubleshooting - GeekChef GCF20E User Manual

PROBLEM
No water comes out
No steam is
generated
Coffee runs out
around the edge of
the filter holder
Coffee comes out too
slow or no coffee
comes out
Water
leakage on the bottom
of machine
Machine is
not working

TROUBLESHOOTING

CAUSE
Water tank is empty
The input voltage or frequency
is inconsistent with nameplate
Machine malfunctions
Steam nozzle clogged
Water tank is empty
Machine malfunctions
Too much powder in the filter
There is powder in the seal
ring under group head
Implementation of the above
operation problems still exist
Coffee powder is too fine, and
Clogged filter
Filter holes are blocked
Water tank is not inserted
Drip tray is filled up
Machine malfunctions
The power cord is not plugged
well
NTC is short circuit
Machine malfunctions
Fill in water and turn on the
steam control knob until hot
water comes out continuously
from the steam wand.
Make sure the voltage and
frequency is consistent with
the rating label.
Please contact with the
Customer Service Center.
Clean steam nozzle.
Fill in water and turn on the
steam control knob until hot
water comes out continuously
from the steam wand. Now
you can start to steam.
Please contact with the
Customer Service Center.
Turn off the machine and wait
for it cool down, clean the filter,
then pour appropriate coffee
powder.
Please contact with the
Customer Service Center.
With thicker coffee powder.
Brush / clean the filter.
Insert the water tank in place.
Please clean the drip tray.
Please contact with the
Customer Service Center.
Plug the power cord into a
wall outlet correctly.
Plug the power cord into a
wall outlet correctly.
16
SOLUTION