Epoch Design DAKOTA 5375 Assembly Instructions

Epoch Design DAKOTA 5375 Assembly Instructions

4 drawer desk with optional dakota hutch

Advertisement

DAKOTA 4 DRAWER DESK • MODEL # 5375
WITH OPTIONAL DAKOTA HUTCH • MODEL # 5376
Congratulations on the purchase of your Dakota Desk. This desk has been crafted to the
highest standards of quality and safety and will give you many years of enjoyment and
practical use.
Because this desk is made of natural wood and manufactured wood there may be variations in
color and grain, and minor checking may occur. This is normal and does not compromise the
integrity of your desk.
On this insert you will find a list of hardware and parts necessary for assembly, as well as
detailed instructions. Assembly is quite simple and requires only a Phillips Head screwdriver.
Assembly will be most easily accomplished if you take the time to carefully sort the hardware
and familiarize yourself with the function of each piece.
If you need assistance with assembly, part replacement or any other matter, contact the
Toll-Free Epoch Design Service Center from anywhere in the Continental United States,
Monday through Friday, 9AM - 5PM Pacific Standard Time at 1-800-589-7990. You may also fax
your request or comments to 425-284-0885 or email info@epochbydesign.com and a service
representative will respond.
Thank you and Enjoy
E
D
POCH
ESIGN
, LLC

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DAKOTA 5375 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Epoch Design DAKOTA 5375

  • Page 1 If you need assistance with assembly, part replacement or any other matter, contact the Toll-Free Epoch Design Service Center from anywhere in the Continental United States, Monday through Friday, 9AM - 5PM Pacific Standard Time at 1-800-589-7990. You may also fax your request or comments to 425-284-0885 or email info@epochbydesign.com and a service...
  • Page 2 If you have the optional DAKOTA HUTCH (MODEL #5376), please follow the instructions below. 1) Carefully lower and align the hutch on to the back of the desk. 2) Attach the safety connector brackets using 4 wood screws for each connector. (8 20mm Wood Screws) 3) Attach the tip-over straps between the HUTCH and the WALL.

This manual is also suitable for:

Dakota 5376

Table of Contents