Getting Started; Hardware Connection - SeeedStudio Grove Recorder V3 Manual

7/24/22, 10:40 AM
Switch to ON if you want to control the module to record vis
Software
8.MCU

Getting Started

Here we will show you how this Grove - Recorder V3.0 works via a
simple demo. First of all, you need to prepare the below stuffs:
Seeeduino V4
Get ONE Now
[https://www.seeedstudio.com/Seeeduino-
V4.2-p-2517.html]

Hardware Connection

Thanks to the bene t of Grove series module, you don't need to
make soldering or bread board, what you need to do is connect the
https://wiki.seeedstudio.com/Grove-Recorder_v3.0/
Grove - Recorder V3 - Seeed Wiki
Grove - Recorder
Get ONE Now
[https://www.seeedstudio.com]
5/12