Getting Started; Play With Arduino; Hardware - SeeedStudio Grove-125KHz RFID Reader Manual

Arduino
Caution
The platforms mentioned above as supported is/are an indication of the module's
software or theoritical compatibility. We only provide software library or code examples
for Arduino platform in most cases. It is not possible to provide software library / demo
code for all possible MCU platforms. Hence, users have to write their own software
library.

Getting Started

Note
If this is the first time you work with Arduino, we firmly recommend you to see
Started with Arduino

Play With Arduino

Hardware

Step 1. Prepare the below stuffs:

Seeeduino V4.2
Get One Now
Step 2. Connect Grove - 125KHz RFID Reader to port D2 of Grove-Base

Shield.
Step 3. Plug Grove - Base Shield into Seeeduino.

Raspberry Pi
before the start.
Base Shield
Get One Now
Getting
Grove - 125KHz RFID Reader
Get One Now