Table of Contents
Advertisement
7/24/22, 10:40 AM
modules to the right port of Base Shield. For this demo, we connect
Grove - Recorder to D2.
Standalone
This module can work standalone without coding.
Record - Press the button until the LED light, and it's recording,
release the button when nish recording.
Play - Press and release the button to play the voice that had
been recorded.
If you want to control the module by code. please go ahead.
Software
https://wiki.seeedstudio.com/Grove-Recorder_v3.0/
Grove - Recorder V3 - Seeed Wiki
6/12
Advertisement
Table of Contents
Need help?
Do you have a question about the Grove Recorder V3 and is the answer not in the manual?