Advertisement
Synthesizers and Samplers
MS-1-BK /
MS-1-BU / MS-1-RD
External CV Calibration
Complete Output CV calibration, then connect the CV out jack to the CV in jack with a 3.5mm cable.
Press "Shift + STEP3" to start External CV calibration.
Wait for the calibration to finish, this is indicated by all of the sequencer LEDs will light up in sequence.
Calibration is finished. Reboot the MS-1.
End of Procedure
Music Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein.
Technical specifications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik,
Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Oberheim, Auratone and Coolaudio are trademarks or registered trademarks of Music Tribe Global
Brands Ltd. © Music Tribe Global Brands Ltd. 2021 All rights reserved.
Confidential, for internal use only. Not to be reproduced.
Advertisement
