Table of Contents
Advertisement
1997 Guitar Regional Training
C
HANGING
Changing patches on the GR-30 can be done by pressing the Patch buttons, the pedals or the GK-2A S1/S2 buttons.
1)
To scroll through the patches consecutively, press the Patch [+] button to scroll forward (A11, A12, A13, etc.),
and the Patch [-] button to scroll backwards (A13, A12, A11, etc.).
2)
To change Patch Banks with the footpedals, hold the S1 button on the GK2-A pickup and press Pedal 4 for
Bank Up or Pedal 3 for Bank Down.
3)
Release the S1 button and press a Pedal to access a Patch.
C
HANGING
The GR-30 is loaded with a wide variety of sounds including pianos, strings, horns, bass guitars, and much more. You
can scroll through patches in an up and down manner using the S1 and S2 switches on the GK-2A pickup. To audition
sounds do the following:
1)
Switch the dial located to the right of the GR-30 until it reaches PATCH INC/DEC BY S1/S2.
2)
Use the S1/S2 switches to call up Patch A11.
(Patch Number Down)
3)
Play the first patch then move on to A12, A13, A14, etc. by pressing the S2 button on the GK-2A pickup.
10
P
(
ATCHES
FRONT PANEL METHOD
P
(
ATCHES
PICKUP METHOD
S1
S2
(Patch Number Up)
)
While holding down S1
)
Here's a few cool sounds to audition:
E 13
Sync Lead 1
E 83
Rock Organ
F 71
Sax Section
D 12
Fingered Bass
Advertisement
Table of Contents
