Download Print this page
Firman P04001 Operator's Manual
Firman P04001 Operator's Manual

Firman P04001 Operator's Manual

Gasoline portable generator

Advertisement

Quick Links

OPERATOR'S MANUAL
GASOLINE PORTABLE GENERATOR
MODEL NUMBER
P04001
Rev Level:00
Record product information to reference when ordering parts or
obtaining warranty coverage.
P/N:340745450 Rev:03

Advertisement

loading

Summary of Contents for Firman P04001

  • Page 1 OPERATOR’S MANUAL GASOLINE PORTABLE GENERATOR MODEL NUMBER P04001 Rev Level:00 Record product information to reference when ordering parts or obtaining warranty coverage. P/N:340745450 Rev:03...
  • Page 2: Table Of Contents

    Register your FIRMAN generator online at www.firmanpowerequipment.com INTRODUCTION Thank you for purchasing a FIRMAN generator. You have selected a high-quality, precision engineered generator set designed and tested to give you years of satisfactory service. This generator is designed to run only on unleaded gasoline. This generator is not intended to be run unattended or to supply power to life safety support.
  • Page 3: Introduction

    INTRODUCTION SIGNAL WORDS DANGER WARNING CAUTION NOTICE Indicates a hazard Indicates a hazard Indicates information Indicates a hazard which, if not avoided, considered Important, which, if not avoided, which, if not avoided, could result in minor or but not hazard-related. will result in death or could result in death moderate injury.
  • Page 4 NOTICE If you have questions about intended use, contact FIRMAN customer service. This portable generator is designed to be used only with FIRMAN authorized parts. System Ground The generator neutral is floating, which means that the AC stator winding is isolated from the grounding fastener and the AC receptacle ground pins.
  • Page 5 INTRODUCTION 1. Only use grounded cords marked for outdoor use rated for your loads. To provide power using extension cords Minimum Gauge, Outdoor Rated Total Amperage Up to 50 FT (15m) Up to 13A Up to 15A Up to 20A Up to 30A 2.
  • Page 6: Features And Controls

    2- 6.0 Gallon Capacity Fuel Tank 10- Oil Filler Cap 3- Fuel Cap 11- Battery Air Filter 12- Outlet Cover 223cc FIRMAN OHV Engine 13- Control Panel Recoil Starter 14- Adapter L5-30 to TT-30 Bottle Opener 15- Handle Remote Holder...
  • Page 7 FEATURES AND CONTROLS ⑨ ⑩ English Customer Service: 1-844-FIRMAN1...
  • Page 8 FEATURES AND CONTROLS English Customer Service: 1-844-FIRMAN1...
  • Page 9 FEATURES AND CONTROLS ⑨ ⑩ English Customer Service: 1-844-FIRMAN1...
  • Page 10 FEATURES AND CONTROLS Control Panel NOTICE Total power drawn from all receptacles must not exceed the name plate rating. 1. Engine Start Switch – To start engine, press and hold the switch in the START (ll) position, the engine will crank and attempt to start. When the engine starts, release the switch to the RUN (l) position. 2.
  • Page 11: Operation

    OPERATION 1.Location DANGER! Engine exhaust contains carbon monoxide, a poisonous gas that could kill you in minutes. You CANNOT smell it, see it, or taste it. Even if you do not smell exhaust fumes, you could still be exposed to carbon monoxide gas. •...
  • Page 12 OPERATION Reduce Risk of Fire WARNING! Exhaust heat/gases could ignite combustibles, structures or damage fuel tank causing a fire, resulting in death or serious injury. • Keep portable generator at least 5 ft. (1.5 m) from any structure, trees or vegetation over 12 in.
  • Page 13 2. Oil and Gasoline Add Engine Oil We recommend using FIRMAN SAE 10W-30 API SJ oil for best performance. Other high-quality detergent oils (API SJ or higher) are acceptable. Do not use special additives. Ambient temperature determines the proper oil viscosity for the engine. Use the chart to select the proper oil for the outdoor temperature range expected.
  • Page 14 Make sure the sump is completely full of oil to the upper limit (H). Do not operate engine until oil level issue is corrected. Contact Firman customer service. Add Gasoline WARNING! Fuel and its vapors are extremely flammable which could cause burns or fire resulting in death or serious injury.
  • Page 15 High altitude may cause hard starting, increased fuel consumption and sparkplug fouling. To operate at high altitudes FIRMAN can provide a high altitude carburetor main jet. The alternative main jet and installation instructions can be obtained by contacting Customer Support.
  • Page 16 OPERATION 3.Starting the Generator 1. Before starting the generator, check for loose or missing parts and for any damage which may have occurred during shipment. Ensure spark plug, muffler, fuel cap, and air cleaner are all in place. 2. Move portable generator outdoors to safe operating location at least 20 feet from any occupied spaces.
  • Page 17 OPERATION 8. For recoil start only-Pull the starter cord slowly until resistance is felt and then pull rapidly. 9. For electric start only-Flip the engine switch to the START (ll) position for a few seconds and then release. 10. Do not over-choke. As soon as engine starts and warms up, move the choke lever to the “RUN” position.
  • Page 18 OPERATION 4. Connecting Electrical Loads This portable generator has been pretested and adjusted to handle its full capacity. The voltage is regulated using an automatic voltage regulator (AVR) . Readjusting the AVR will void warranty. WARNING! Generator voltage could cause electrical shock or burn resulting in death or serious injury.
  • Page 19 OPERATION 5. Stopping the generator 1. Turn off and remove all electrical loads. Never stop the generator with electrical devices plugged in and turned on. Never stop the engine by moving the choke to the start position. Let the generator run at no-load for one minute to stabilize internal temperatures of the engine and generator.
  • Page 20 OPERATION 5. Turn the fuel valve to the “OFF”(O) position. If a cover is used, do not install until unit has cooled. English Customer Service: 1-844-FIRMAN1...
  • Page 21: Maintenance - Storage

    Maintenance - Storage MAINTENANCE SCHEDULE Every Daily(Before Initial Every Every ITEM NOTES 100 hours operation) 25 hours 50 hours 250 hours (or annual) Check condition. Adjust gap √ Spark Plug and clean. Replace if necessary. Check oil level. √ Engine Oil Replace.
  • Page 22 (b) Reinstall the drain plug and fill the engine with oil until it reaches the HIGH(H) level on the oil filler dipstick. DRAIN PLUG NOTICE We recommend using FIRMAN SAE 10W-30 API SJ oil for best performance. Other high- quality detergent oils (API SJ or higher) are acceptable. See Oil and Gasoline English...
  • Page 23 Maintenance - Storage Air Filter Maintenance (a) Carefully remove foam air filter element and wash it with liquid detergent and water only. Squeeze dry in a clean cloth. (b) Saturate foam air filter element with clean engine oil and squeeze in a clean cloth to remove excess oil.
  • Page 24 SIDE ELECTRODE 0.028 - 0.031 in. (0.7 - 0.8 mm) SEALING WASHER SPARK PLUG: FIRMAN P/N 330723001 or CHAMPION N9YC. Maintenance Valve Clearance Intake: 0.004 – 0.006 in. 0.10 – 0.15 mm Exhaust: 0.004 – 0.006 in. (0.10 – 0.15 mm) Muffler and Spark Arrester WARNING! Contact with muffler area could cause burns resulting in serious injury.
  • Page 25 3. Carefully remove the carbon deposits from the spark arrester screen with a wire brush. 4. Replace the spark arrester if it is damaged. If replacement parts are required, make sure to use only FIRMAN original equipment replacement parts. 5. Position the spark arrester in the muffler and attach with the screws.
  • Page 26 Maintenance - Storage Battery Replacement A(M6X12) 1. Remove the spark plug wire from spark plug. 2. Remove the nut and bolt from the negative(-) and positive(+) posts. 3. Loosen and remove the screw A on the battery holding bracket. 4. Remove the battery and recycle and dispose of properly. 5.
  • Page 27 Maintenance - Storage Long Term Storage It is important to prevent gum deposits from forming in essential fuel system components such as the carburetor, fuel hoses or tank during storage. Ethanol-blended fuels (called gasohol, ethanol or methanol) attract moisture, which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage.
  • Page 28: Troubleshooting- Specifications

    2. Dirty air cleaner. Engine shuts down when 3. Fill crankcase to proper level or place. 3. Low oil level. generator on level surface. running. For all other issues, contact authorized dealer or Firman customer service. English Customer Service: 1-844-FIRMAN1...
  • Page 29 Troubleshooting – Specifications SPECIFICATIONS Model P04001 Starting Watts 5000 4000 Running Watts* Rated AC Voltage 120V Rated Fequency 60Hz Phase Single Voltage Regulator Power Factor Alternator Type Brushed Engine FIRMAN Engine Type Single Cylinder, 4-Stroke OHV Air Cooled Displacement 223cc...
  • Page 30 PARTS DIAGRAM AND PART LIST P04001 PARTS DIAGRAM 34 35 18 19 20 21 English Customer Service: 1-844-FIRMAN1...
  • Page 31 223cc ENGINE PARTS DIAGRAM English Customer Service: 1-844-FIRMAN1...
  • Page 32: Parts Diagrams - Parts Lists - Wiring Diagram

    Parts Diagrams - Parts Lists - Wiring Diagram P04001 Portable Generator Qty. Qty. NO. Part Number Description NO. Part Number Description 340463001 FIRMAN 223cc Engine 40.4 336713591 Flat Pad(ø8.2×ø17×0.8) 336713501 Rubber Cap 2 40.5 336713590 Pin, Shaft 336713502 Rubber Cap1...
  • Page 33 Parts Diagrams - Parts Lists - Wiring Diagram Qty. NO. Part Number Description 336713540 Clamp Ø8×6 336713635 Pipe 330713509 Clip(φ8.7×8) 336713644 Remote Holder 336713642 Remote Control 340723004 Adapter Holder 340453003 Socket 340723003 Waterproof Cover 336713618 Pilot Lamp 336718322 Nut M3 336713570 Multi Meter 336713616...
  • Page 34 Parts Diagrams - Parts Lists - Wiring Diagram FIRMAN 223cc Engine Qty. Qty. NO. Part Number Description NO. Part Number Description Cylinder Head Air Guide 336718329 Flange Bolt M6×15 340713011 340418301 336723524 Gasket, Cylinder Head Cover Starter Assy 357723577 336723525...
  • Page 35 Parts Diagrams - Parts Lists - Wiring Diagram Wiring Diagram English Customer Service: 1-844-FIRMAN1...
  • Page 36: Service - Warranty

    FIRMAN GENERATOR will register the warranty upon receipt of your Warranty Registration Card and a copy of your sales receipt from one of FIRMAN’s retail locations as proof of purchase. Please submit your warranty registration and your proof of purchase within ten(10) days of the date of purchase.
  • Page 37 Limits of Implied Warranty and Consequential Damage FIRMAN disclaims any obligation to cover any loss of time, use of this product, freight, or any incidental or consequential claim by anyone from using this product. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANT ABLILITY OR FITNESS FOR A PARTICULAR PURPOSE.
  • Page 38 If any such part fails during the period of warranty coverage, the part will be repaired or replaced by FIRMAN at no charge to the owner. Any such part repaired or replaced under the warranty will be warranted for the remaining warranty period.
  • Page 39 Service – Warranty (8) Throughout the emissions warranty period defined in Subsection (b)(2), FIRMAN will maintain a supply of warranted parts sufficient to meet the expected demand for such parts. (9) Any replacement part may be used in the performance of any warranty maintenance or repairs and must be provided without charge to the owner.
  • Page 40 FIRMAN POWER EQUIPMENT INC. 8716 W. LUDLOW DR. SUITE #6 PEORIA, AZ 85381 All rights reserved. Any reprinting or unauthorized use 1-844-347-6261 without the written permission is expressly prohibited. WWW.FIRMANPOWEREQUIPMENT.COM P/N:340745450 Rev:03...