JVC XL-PM400SAS Instructions

Power Supply Preparations
The illustration of the grip band is omitted.
Using the AC adaptor (not supplied)
Using dry-cell batteries
(not supplied)
AC power outlet
Two "AA" (LR6) alkaline batteries.
Caution:
Do not forcibly open the battery lid too wide.
Battery indicator
Battery indicator
Notes:
• Even if the unit is turned off, small power is consumed as long
This indicator appears when the batteries are almost out of power.
as the AC adaptor is connected to the AC power outlet.
Power will be cut off a short while later.
• When you want to purchase the AC adaptor, see page 5.
Note:
Turning off the Anti-Shock Protection EX will save the battery power
more or less. For details, see "Anti-shock Protection EX" on page 4.
(Available for an Audio CD only)
Preventing Accidental Operation (Hold mode)
This function causes the unit to ignore, accidental button presses. • When the unit is in Hold mode, "HOLd" and "
follows.
Hold mode prevents the following:
Power on : " " stays lit.
• Powering on the unit accidentally (which can cause the batter- Power off : "HOLd" and " " lights up for a few seconds
when 6 is pressed.
ies to go dead).
• Play being cut off unexpectedly.
Note:
To use the Hold mode
If the HOLD switch is set to the ON position, you cannot turn on
HOLD the unit.
OFF ON
• To prevent the unit from powering on accidentally, set the
HOLD switch to the ON position while the unit is turned off.
• To prevent the unit from unexpected operation during play,
set the HOLD switch to the ON position after you starts play-
ing the disc.
About MP3 files
MP3 File Compatibility Playing order of MP3 files
• This player can read MP3 files that are recorded in the format The illustration below shows the normal playing order of the MP3
that is compliant with ISO 9660. files. You will see that the MP3 files are played back in the order
• The player can read or play an MP3 file with the extension code
from the higher hierarchy to the lower one.
—".mp3".
Hierarchy
3 Group
4
MP3 file
6
7
1
8
2
9
10
5
2
Basic Play
The illustration of the grip band is omitted.
AC adaptor (for multi voltage area only)
(not supplied)
Follow the steps in the numerical order.
3
Before use
Make sure the present voltage of your AC adaptor fits to your lo-
HOLD
cal voltage before plugging it into the AC power outlet. If it
OFF
AC adaptor
doesn't, shift the AC line-voltage selector with a screwdriver so
that it corresponds to your local voltage.
VOLTAGE
ADJUSTOR
AC 110V AC 220V 4
~127V ~240V
VOLUME
If the power plug will not fit your socket, use the AC plug adaptor.
How to use the AC plug adaptor (not
supplied)
6
Note: VOLUME
When you want to purchase the AC adaptor and the AC plug
adaptor, see page 5.
Operation
During play,
To pause
" lights as
During play,
To stop
While stopped,
To turn off the
unit
Skip function
During play,
Fast forward/
reverse
Search function
Keep depressed during play.
During play or while stopped,
Group skip
(MP3 only)
3
5
ON
For Audio CD
01 0
02
Track number in play
Elapsed playing time
1
of each track
Firmly connect
2
Label side
R L
For your reference:
Display/reference
Button
"dISC"
Audio CD MP3
This indication appears if 3/8 is pressed when no disc is loaded
or if the disc is not properly seated.
"– – "
01
07 0 4
00 18 00 07
Preparation period before playing the track
Flashes for several seconds after pressing 3/8 to play.
Press again to restart play.
"OPE n "
This indication appears when the lid is open.
Total number of tracks Total number of groups
Removing discs
10
10 35 Turn off the unit and, after the disc has stopped rotating, remove
44 48
the disc as shown below:
Total playing time Total number of tracks
No indication.
• To skip back to the previous track, quickly press 4
twice.
Forward Auto power off
• During Program play, the button is used to fast for-
ward or back through the programmed sequence of If the unit is left in stop mode for 30 seconds, the unit turns
tracks. itself off automatically to prevent the batteries from running
Reverse • During Random play, the skip button cannot be used down.
to skip back to tracks that were played previously in
the random sequence.
Disc rotation noise
The portable CD player uses a power-saving operation method
so that disc rotation noise will intermittently be emitted. But, it
is not a failure.
Group number
02
0 01
A.S.P. /
GROUP UP
Other Play Methods
Intro play
You can successively play the first 10 seconds of every track.
• Play stops automatically when
all the tracks have been played. 1
While stopped,
Elapsed playing time
INTRO
of each track
MODE
For MP3
(Repeatedly)
2
1 0 0 01
53 02 53
MP3
Group number Lights when a MP3
disc is used
Track number
(in the group) in play To cancel
Press MODE repeatedly until "INTRO" goes out.
Notes:
• You can also select Intro play during playback.
In this case, Intro play will start from the next track after the
current track has finished.
• You can also select Intro play during Program play mode.
Random play
During playback,
RND
MODE
(Repeatedly)
After playing all tracks, the unit stops.
To cancel
Press MODE until "RND" goes out, or press 7 to stop the disc.
Notes:
• You can also select Random play in stop mode.
• During Program play, you can not select Random play.
4
Program play Repeat play
You can program up to 64 tracks in any desired order including During playback,
the same tracks.
For Audio CD, go to step 3.
Though the display differs a little, operation is the same. MODE
GROUP
(Repeatedly)
1
While stopped, 1 track repeat
1 group repeat
(MP3 only)
(MP3 only)
ALL
00
00 0
P 0 - 1
All track repeat
PROGRAM
Program sequence number
To cancel
Press MODE repeatedly until the repeat indicator goes out.
2
(MP3 only) Select the desired group number.
(e.g.02) Notes:
• You can also select Repeat play during Program play.
• You can also select Repeat play while stopped.
02
0 01
P - 01 Hyper-Bass Sound effect
You can enjoy powerful bass sound.
Group number
HBS
OFF 1 2
3
02 0 01 Anti-Shock Protection EX
P 01
-
PROGRAM
This function achieves excellent performance against sound inter-
ruption caused by vibrations. You will be able to enjoy listening
4 to music during (not vigorous) jogging.
Select the desired track.
By utilizing the high-performance servo circuit, audio data will be
stored in the memory ahead of time.
For Audio CD: Up to 175 seconds worth (Anti-Shock Protection
on/off selectable)
For MP3: Up to 426 seconds worth at 128 kbps (Anti-Shock
02
03 0
P 0 - 1
Protection is fixed to on.)
Normally, this function is in effect.
Track number
5 ASP ANTI SHOCK
indicator
As the audio data is gradually stored, the indicator changes as follows:
PROG
00
0 00
P 0 - 2
PROGRAM
ASP ASP [Fully stored]
The track is registered.
To cancel
6
For MP3, repeat steps 2-5 to select other tracks.
(Audio CD only)
For Audio CD, repeat steps 4 and 5.
When you program exceeding 64 tracks, the program se-
quence number returns to "01" and will overwrite the previ- A.S.P. /
GROUP UP
ous setting.
The "ANTI SHOCK" indicator goes out.
7
To activate again (Audio CD only)
Press A.S.P./GROUP UP.
Notes:
• During this operation, the disc rotates at a higher rate than usual
• To confirm the program
in order to collect extra audio data. This may cause the batteries
While stopped, press PROGRAM repeatedly. At this time, you to run out faster and could result in a slight increase in disc rota-
can add and change the program, if required.
tion noise.
• This function can be switched ON and OFF during playback.
• To delete the entire program However, this may cause a slight interruption in the sound be-
While stopped, press STOP. Or turn off the unit. cause the disc's rotational speed changes.