Advertisement
Quick Links
ASSEMBLY INSTRUCTION FOR ACME FURNITURE
Thank you for purchasing the quality product. Be sure to check all packing material carefully for small parts which
may have come loose inside the carton during shipment. Separate, identify and count all parts and metal hardware.
Compare with all parts are present. If any part(s) are missing or damaged, please contact your local furniture dealer.
For efficient and speedy service, please indicate the model number and code letter of part(s) needed.
***Do not fully tighten screws until fully assembled.***
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Acme Furniture AC00382
Summary of Contents for Acme Furniture AC00382
- Page 1 ASSEMBLY INSTRUCTION FOR ACME FURNITURE Thank you for purchasing the quality product. Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment. Separate, identify and count all parts and metal hardware.
- Page 2 Because our products may be challenging for beginners, we deeply understand that you may encounter some difficulties. To avoid discouragement, we have provided some useful tips, as follows. Enough Open Space Ensure that there is enough space for movement during assembly.
- Page 3 Every cam bolt must have a cam lock connector to hold the parts together. When assembling, the hardware parts and the wooden board must be kept vertical, and the tools must be in full contact with the hardware groove. Caution: Do not use excessive force to advoid over- fastening, or even...
- Page 4 The holes of the slide rail are in the same direction as the following page. 1 2 3 Inner rail with narrower width: fixed on the side panel of the Front 1 2 3 product. 1 2 3 Caution: The second hole shown here is the hole position fixed on the slide rail when installing the drawer.
- Page 6 Attention Some number parts listed on the instruction sheet may not be in parts bag as they may already be assembled. Carefully check parts and packing materials prior to ordering replacements.
- Page 7 1)Front side of slide rail needs to match front shape of the board. Front 2)Tighten the screws in the second hole in the front and the rear end of the inner rail. Front Front...
- Page 9 Insert in as arrow direction to specify...
- Page 13 Extend the two outer slides of the runners so that they could align with the sides of the drawer. Make sure the pre-drilled holes from the drawer align with the screw holes of the outer slides. Secure two screws from the inside of the drawer using a Phillips screwdriver to tighten them to the outer slides.
Need help?
Do you have a question about the AC00382 and is the answer not in the manual?
Questions and answers