Safety Warnings • Read all the instructions carefully before using the unit and keep them for future reference. • Retain the manual. If you pass the unit onto a third party, make sure to include this manual. • Do not disassemble the keyboard or remove any parts. •...
Unpacking Thank you for purchasing your new Remove all items from the packaging. Retain the product. packaging. If you dispose of it please do so according to We recommend that you spend some time reading local regulations. this instruction manual in order that you fully The following items are included: understand all the operational features it offers.
Function Keys Volume Keys To access Esc, F1-F12, Delete, press the Fn Key and the To access volume function, press the Fn Key and the desired key together. desired key together. Decrease the Volume Increase the Volume Mute sound...
Arrow Keys Press the Fn Key and W Button repeatedly to switch on/off Arrow Keys function. Down After the Arrow Keys function is switched on, press W / A / S / D for your desired arrow direction. Left Right...
Backlight Effect To access these functions, press the Fn Key and the desired key together. Adjust the backlight flashing sequence level. Switch the backlight on/off. Select different backlight effects. (18 modes / 1 customised mode) Adjust the backlight brightness. Spacebar Change the backlight colour.
Customising the Backlight Effect You may customise the backlight for each keypress. 1. Press Fn + repeatedly to select customise backlight mode. Keypress WASD will light up as the first time. 2. Press and hold Fn + to enter backlight setting mode.
(under ADX HUB LIGHTING SOFTWARE DOWNLOAD) 3. Run the software (ADX HUB Setup.exe) installer. 4. Follow the installation instruction to complete the installation. 5. Choose ADX HUB.exe from the desktop to start the software. The software is not available for MAC OS.
User Interface 1. Choose ADX HUB.exe from the desktop to launch the software. 2. Select “Keyboard“ and then “ADXMK0823“ in the connected device menu to enter the interface.
User Interface - Customise 1. Select Customise, and then select your customised settings. 2. After settings, save your own preference in the Profile menu. 3. Select “Apply“ to implement your settings, or “Reset” to reset all settings.
User Interface - Light 1. Select Light to enter the Lighting Settings menu. 2. Choose your preference among the below: • Mode • Brightness Speed • Color Mode • 3. Select “Apply“ to implement your settings, or “Reset” to reset all settings.
User Interface - Macro 1. Select Macro, and then “+“ to create a New Macro Command. 2. Press Start Recording. 3. After recording your input command, press Stop Recording. 4. You may edit your recorded commands on the right menu. 5.
User Interface - Light Effect If one more ADX gaming device is connected, you may synchronize their light effects. 1. Select Light Effect, and the devices you want to apply the light effect. 2. Select your preferred Lighting Settings (Mode, Brightness and Speed).
Hints and Tips The symbol on the product or its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to • Make sure the USB plug is fully plugged into a USB port dispose of your waste equipment by handing it over to a and the computer is on or try to use a different USB designated collection point for the recycling of waste...
Page 16
Currys Group Limited (co. no. 504877) 1 Portal Way, London, W3 6RS, UK EU Representative Currys Ireland Limited (259460) 3rd Floor Office Suite Omni Park SC, Santry, Dublin 9, Republic of Ireland IB-ADXMK0823-220815V1...