Table of Contents
Advertisement
Error
USB Update Error Display
Code
U p d a t i n g
14
1 4
U p d a t i n g
15
1 5
U p d a t i n g
16
1 6
C o n n e c t i o n F a i l
20
2 0
F i l e s N o t F o u n d
21
2 1
N o t M a t c h F i r m
22
2 2
C o n n e c t i o n F a i l
23
2 3
C o n n e c t i o n F a i l
24
2 4
C o n n e c t i o n F a i l
25
2 5
D o w n l o a d
26
2 6
C o n n e c t i o n F a i l
27
2 7
C o n n e c t i o n F a i l
36
3 6
F i l e s N o t F o u n d
37
3 7
N o t M a t c h F i r m
38
3 8
f a i l
Block Write failed while rewriting
Main.
f a i l
Error in Verify after rewriting Main
(Check Sum Error).
f a i l
Setup failure of the transfer
method of XModem.
Unable to detect USB after SBL
Mode.
No Firmware File in USB after SBL
Mode.
Firmware File in USB after SBL
Mode for unsupported Model
name/area.
Failed to obtain entire Firmware
information after SBL Mode.
Time Out while obtaining entire
Firmware information after SBL
Mode.
Failed to transit to SBL Mode.
f a i l
Time Out in Download (writing to
SDRAM) for Firmware Download.
Failed to write to EEPROM after
SBL Mode.
Unable to detect USB.
No Firmware File in USB.
Firmware File in USB for unsup-
ported Model name/area.
Details of Error code
73
Coping strategies
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for five seconds.
Disconnect and connect the USB
memory.
Disconnect and connect the USB
memory.
Check the supported Model name/area
for the Firmware File.
Disconnect and connect the USB
memory.
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for five seconds.
Advertisement
Table of Contents
