ABB HT563116 Operation Manual page 87

Operation Manual / 4 Product description / A130-M.. - A145-M..
6 Periodic maintenance work
6.4.3 Compressor-end, non-rotating parts
Handling operating materials and supplies
Swallowing or inhaling vapours of operating materials and supplies or
contact with them may be harmful to health.
WARNING
Do not breathe in these substances and avoid contact with the skin.

Ensure proper ventilation.

Observe the information in the material safety data sheet for the operating

materials and supplies.
Comply with local legislation.

Wear safety goggles.
Wear safety gloves against mechanical risks.
Wear a respiratory mask to protect against gases.
The following parts, which are relevant in terms of performance, can be cleaned in accordance
with the description below.
Figure 25: Compressor-end, non-rotating parts
72000 Compressor casing
77000 Wall insert
79000 Diffuser
Steam-clean the above-mentioned components or soak in diesel oil or water with

household cleaning agents. After soaking, remove contamination with a brush.
Dry components completely.

Spray cleaned surfaces with penetrating oil. Do not spray exterior surfaces of the

turbocharger.
Dispose of contaminated water and cleaning agents in accordance with the information in

the material safety data sheet.
© Copyright 2015 ABB. All rights reserved. HZTL4031_EN
Page 57 / 115
Revision C February 2016