ABB HT563116 Operation Manual page 114

Operation Manual / 4 Product description / A130-M.. - A145-M..
8 Dismantling and fitting
Loosening the cartridge group with a press-off tool
If the cartridge group cannot be loosened, it can be pressed off against the
turbine casing with the press-off tool (90042) (see chapter Pressing off the
NOTICE
casing [➙ 82]).
Figure 36: Removing cartridge group 1
1. Treat threads of studs (51006) with penetrating oil and leave to take effect.
2. Loosen nuts (51007) and remove Verbus Ripp® washers (51003) together with the
fastening strips (51002).
Figure 37: Removing cartridge group 2
3. Insert screws from service support into cartridge group.
4. Secure ring nuts (VRM) onto the screws with washers.
5. Secure the lifting gear to the ring nuts and suspension eye as shown.
6. Remove the cartridge group vertically from the turbine casing.
7. Place the cartridge group on a soft underlay.
© Copyright 2015 ABB. All rights reserved. HZTL4031_EN
Page 84 / 115
Revision C February 2016