ABB HT563116 Operation Manual page 85

Operation Manual / 4 Product description / A130-M.. - A145-M..
6 Periodic maintenance work
6.4.2 Cleaning the filter silencer
Figure 24: Cleaning the filter silencer
81135 Filter silencer body
81136 Absorption segment
81137 Sheet-metal covering
81265 Filter ring
Disassembly and assembly
The disassembly and assembly of the filter silencer is described in chapter
Disassembly and assembly.
NOTICE
Cleaning the filter ring (if present)
Remove filter ring (81265).

Clean filter ring (81265) as required or every 500 hours of operation and replace after the

fifth cleaning process at the latest.
Contamination of the filter ring depends on the degree of purity of the sucked-in air.
Rinse the filter ring (81265) with water and mild detergent or, in the case of heavy

contamination, soak and carefully push through. Rinse in cold water. Avoid high
mechanical loads (water jet).
Let the filter ring dry completely before assembling.

Dirty water and mild detergent must be disposed of in compliance with locally applicable

regulations.
© Copyright 2015 ABB. All rights reserved.
81266 Cover grid
81270 Tension band
81271 Lock
HZTL4031_EN
Page 55 / 115
Revision C February 2016