Marantz NR1506 /U1B Service Manual page 54

Error
USB Update Error Display
Code
3C
U p d a t i n g
3D
U p d a t i n g
3F
C o n n e c t i o n F a i l 3 F
50
C o n n e c t i o n F a i l 5 0
51
C o n n e c t i o n F a i l 5 1
52
N o t M a t c h F i r m
54
U p d a t i n g
55
U p d a t i n g
56
C o n n e c t i o n F a i l 5 6
57
F i l e s N o t F o u n d
5A
C o n n e c t i o n F a i l 5 A
5B
U p d a t i n g
5C
U p d a t i n g
5D
U p d a t i n g
5E
U p d a t i n g
Error notification received while
f a i l 3 C
requesting the Firmware Info.
Time Out while obtaining Firm-
f a i l 3 D
ware information.
Failed to transit to SBL Mode.
Unable to detect USB.
No Firmware File in USB.
The Firmware File in the USB does
5 2
not support your model and area.
Error notification received while
f a i l 5 4
requesting the Firmware Info.
Time Out while obtaining Firm-
f a i l 5 5
ware information.
Unable to detect USB for Firm-
ware Download.
No Firmware File for Firmware
5 7
Download.
Invalid DeviceID in response or
no response from Sub for the "C"
command.
NACK received in response or
no response from Sub for the "L"
f a i l 5 B
command.
No Update Packet received from
f a i l 5 C
CY920 (Time Out).
Abnormal data in Update Packet
f a i l 5 D
received from CY920 (CRCError).
Abnormal data in Update Packet
received from CY920 (PacketNo-
f a i l 5 E
Error).
54
Details of Error code Remedies
This unit automatically retries the
request several times. Wait until the
Display stops. If the Display stops at the
Error display, press and hold the "Power
operation" button for 5 seconds.
This unit automatically retries the
request several times. Wait until the
Display stops. If the Display stops at the
Error display, press and hold the "Power
operation" button for 5 seconds.
This unit automatically retries the
request several times. Wait until the
Display stops. If the Display stops at the
Error display, press and hold the "Power
operation" button for 5 seconds.
Disconnect and reconnect the USB
memory.
Make sure that the Firmware File is in
the USB memory.
Make sure that the model name and
area are supported by the Firmware
File.
This unit automatically retries the
request several times. Wait until the
Display stops. If the Display stops at the
Error display, press and hold the "Power
operation" button for 5 seconds.
This unit automatically retries the
request several times. Wait until the
Display stops. If the Display stops at the
Error display, press and hold the "Power
operation" button for 5 seconds.
Disconnect and reconnect the USB
memory.
Make sure that the Firmware File is in
the USB memory.
This unit automatically retries the
request several times. Wait until the
Display stops. If the Display stops at the
Error display, press and hold the "Power
operation" button for 5 seconds.
This unit automatically retries the
request several times. Wait until the
Display stops. If the Display stops at the
Error display, press and hold the "Power
operation" button for 5 seconds.
This unit automatically retries the
request several times. Wait until the
Display stops. If the Display stops at the
Error display, press and hold the "Power
operation" button for 5 seconds.
This unit automatically retries the
request several times. Wait until the
Display stops. If the Display stops at the
Error display, press and hold the "Power
operation" button for 5 seconds.
This unit automatically retries the
request several times. Wait until the
Display stops. If the Display stops at the
Error display, press and hold the "Power
operation" button for 5 seconds.