Table of Contents
Advertisement
LX-D700U/E.Q33E 6/3/98 3:48 PM Page 22
Main Unit and Remote Control Unit
Buttons Provided On Main Unit
AUTO
VIDEO
COMPUTER
AUTO
This makes automatic screen adjustment during the COMPUTER input. The contents of adjustment are the phase,
tracking, horizontal position, and vertical position. These can be individually adjusted through the on-screen menu.
Sometimes, phase tracking cannot make perfect adjustment. Adjust it to your desired position through the screen
menu. In addition, if [BRIGHTNESS] is increased, sometimes this [AUTO] does not function accurately. Return the
[BRIGHTNESS] to its initial value by resetting through the on-screen menu and then start with [AUTO].
Buttons Provided On Remote Control Unit
OPERATE
This turns the lamp on and off.
VIDEO
OPERATE
This switches the picture to the VIDEO input.
VIDEO
COMPUTER
COMPUTER
VOL. –
VOL. +
This switches the picture to COMPUTER. This also switches between COMPUTER1 and 2.
HIDE
MUTE
AUTO
This makes automatic screen adjustment during the COMPUTER input. Contents of
SPECIAL
adjustment are the synchronization, tracking, horizontal position, and vertical posi-
RESIZE
FREEZE
tion. These can be individually adjusted through the on-screen menu.
AUTO
MENU
MENU
L
R
This turns on and off the on-screen menu display.
RESIZE
This switches between the resizing screen and the window screen.
FREEZE
LIGHT
POINTER
This freezes the screen.
SPECIAL
This displays the SPECIAL modes set on the on-screen menu.
Zoom mode:
Preview mode: This allows the simultaneous display and selection of all input screens.
Strobe mode:
HIDE
This performs the video mute of the screen. It is feasible to set the screen during the
mute with either a pattern display or a black screen through the on-screen menu. If
After switching the picture,
this button is pressed again, the picture can be projected.
there are instances some-
MUTE
times when the picture
This mutes audio. Press this button again to bring the audio back.
before switching remains
VOL. (+, –)
on the screen. If so, press
This adjusts the volume of the internal speaker system.
the [AUTO] button on the
POINTER
main unit or the remote
This is used for the operation of the on-screen menu. When the remote control unit
control unit, or move the
is used as a mouse, it can move the mouse pointer on the computer.
picture of [DISPLAY POSI-
TION] on the screen menu
L.(LEFT) BUTTON
up and down and left and
This can be used as a left button of the mouse.
right, and clear the remain-
This is used for the operation of the on-screen menu.
ing picture away.
R.(RIGHT) BUTTON
This can be used as a right button of the mouse.
This is used for the operation of the on-screen menu.
LIGHT BUTTON
When operating the remote control unit in a dark place, press this button. Then, the
buttons on the keypad are kept illuminated for about 5 seconds.
22
OPERATE
This turns on and off the lamp.
OPERATE
VIDEO
This switches the picture to VIDEO input.
COMPUTER
This switches the picture to COMPUTER.
Furthermore, this switches between COMPUTER1
and 2.
This enables the partial enlargement of the screen.
Strobe is displayed.
Advertisement
Table of Contents
