Tray Lock; Sound And Other Settings - JVC TH-C20C Instructions Manual

Advanced operations
Repeating a desired part [A-B Repeat]
You can repeat playback of a desired part by
specifying the beginning (point A) and ending
(point B).
7 During playback
1
Press ON SCREEN twice.
The on-screen bar appears on the TV screen.
2
Press Cursor 3/2 to highlight
3
Press ENTER.
4
Press Cursor Y/5 repeatedly to select
"A-B".
5
Press ENTER at the beginning of the
part you want to repeat (point A).
The repeat mode indicator "
window.
6
Press ENTER at the end of the part you
want to repeat (point B).
The repeat mode indicator on the display window changes to
" " and A-B Repeat Playback starts.
7
Press ON SCREEN.
The on-screen bar disappears.
To cancel
Select "OFF" in step 4, then press ENTER.
NOTE
• When playing back a DVD VIDEO/DVD VR, A-B Repeat Playback is
possible only within the same title.
• "A-B" cannot be selected during Program and Random Playback.
• "A-B" cannot be selected during playback with PBC function.

Tray lock

You can lock the tray and prohibit unwanted disc ejection.
On the center unit ONLY:
While the system is turned off
Press and hold
• "LOCKED" appears on the display window.
• If you try to eject the disc, "LOCKED" appears to indicate that
the tray is locked.
To cancel
Carry out the same operation again.
• "UNLOCKED" appears on the display window.
DVD DVD DVD
VR
VIDEO AUDIO
.
" appears on the display
See page 22 for button locations.

Sound and other settings

IMPORTANT
Before using the remote control for the following
operation;
• Set the remote control mode selector to AUDIO.
NOTE
• Before you start operation; There is a time limit when
doing the following steps. If the setting is cancelled before you finish,
start from step 1 again.
1
Press SETTING.
Example:
2
Press Cursor Y/5 to select the item
you want to set.
• BAL. (Balance):
You can adjust the balance of the sound between "R (right) –
21" and "L (left) –21". To set the balance to normal, select
"CNTR (center)".
• MON. (Monitor Out):
Select the video output jack type by which you watch DVD
playback after connecting your TV. (See page 10.) Set the
video output to use AV COMPU LINK remote control
system. (See page 37.)
VIDEO: To watch DVD playback via the VIDEO jack.
S: To watch DVD playback via the S-VIDEO jack.
COMP (Component):
To watch DVD playback via the COMPONENT
VIDEO OUT jacks.
3
Press Cursor 3/2 to make an
adjustment or selection.
Example:
The adjustment is set and the display automatically disappears
a few seconds later.
32