Tray Lock; Balance Setting - JVC TH-P7 Instructions Manual

Advanced operations
When using the on-screen bar:
1
Press ON SCREEN twice.
The on-screen bar appears on the TV screen.
2
Press Cursor 3/2 to highlight
.
3
Press ENTER.
4
Press Cursor Y/5 repeatedly to
select "A-B".
5
Press ENTER at the beginning of
the part you want to repeat (point
A).
6
Press ENTER at the end of the part
you want to repeat (point B).
A-B Repeat Playback starts.
7
Press ON SCREEN.
The on-screen bar disappears.
To cancel
Select "OFF" in step 4, then press ENTER.
NOTE
• When playing back a DVD VIDEO, A-B Repeat Playback is
possible only within the same title.
• "A-B" cannot be selected during Program and Random
Playback.
• "A-B" cannot be selected during playback with PBC function.
See page 22 for button locations.

Tray lock

You can lock the tray and prohibit unwanted disc ejection.
On the center unit ONLY:
While the system is on standby mode, press 0, with 7
pressed and held.
Press and hold
• "LOCKED" appears on the display window.
• If you try to eject the disc, "LOCKED" appears to indicate
that the tray is locked.
To cancel
Carry out the same operation again.
• "UNLOCKED" appears on the display window.

Balance Setting

You can adjust the balance between the front left and front
right speakers.
NOTE
• This function also takes effect for the sources other than
DVD.
• Before you start the operation;
There is a time limit when doing the following steps. If the
setting is cancelled before you finish, start from step 1 again.
1
Press SETTING with SHIFT
pressed.
Example:
2
Press Cursor 3/2 to make an
adjustment or selection.
Example:
The adjustment display automatically disappears a few
seconds later with the current setting.
32