Playback; Basic Playback - JVC TH-C20C Instructions Manual

Dvd digital theater system
Hide thumbs Also See for TH-C20C:
Table of Contents

Advertisement

Playback

• The icon such as
shows the disc formats or file types the
operation is available for.
IMPORTANT
Before using the remote control for the
following operation;
1 Set the remote control mode selector
to AUDIO.
2 Press DVD or USB MEMORY.
The buttons described below are used on pages 17 to 21.
Number
buttons
Cursor
(3/2/Y/5)/
ENTER
17

Basic playback

7 To play a disc
1
Press the desired DISC (1-5)
0 on the center unit.
• The system turns on and the disc tray comes
out.
2
Place a disc.
Label side up
3
Press DISC (1-5), with SHIFT pressed.
NOTE
• Up to 5 discs can be loaded.
• You can also start playback by pressing 3 (play button) or DVD.
• The system plays back available discs sequentially until you stop
Remote
control mode
playback or until the disc loaded on the DISC 5 tray reaches to the
selector
end. However, when DVD VIDEO or DVD AUDIO is loaded in the
system, playback of the disc next to the DVD VIDEO or DVD
AUDIO will not start.
7 To play a file in a USB mass storage class device
Press USB MEMORY.
The operations of the files in a USB mass storage class device
depend on the file types stored in the device.
For MP3/WMA files
The file control display (see page 26) appears on the TV screen.
For JPEG files
(play button)
Each file (still pictures) is shown on the TV screen for about 3
seconds (slide-show). When stopping playback, the file control
display (see page 26) appears on the TV screen.
For ASF/MPEG-2/MPEG-1 files
Pressing TOP MENU/PG or MENU/PL shows the file control display
(see page 26) on the TV screen during playback.
For DivX files
During the readout time, "READING INDEX" may appear on the
TV screen.
Pressing TOP MENU/PG or MENU/PL shows the file control display
(see page 26) on the TV screen during playback.
NOTE
• When several types of files are recorded on a disc/device, select
appropriate file type on the set up menu. (See page 34.)
7 To pause playback
Press 8.
To continue playback, press 3 (play button).
7 To stop
Press 7.
NOTE
• (For JPEG) The system cannot accept operations even though you
press any buttons before the entire picture appears on the TV screen.
When placing an 8 cm disc

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents