133
Power Up
Verify Alarm Status
5.5
Verify Alarm Status
This procedure describes how to verify any active alarms on a newly set up RU.
Step 1
Contact customer NOC to verify they have visibility of the RU and to verify if any active alarms are present.
Note: If any alarms or conditions exist, create trouble tickets as needed to address them.
Step 2
Confirm with the customer that the work is completed successfully.
Step 3
Clean up area before leaving the customer premises.
✓
This task is complete.
Fujitsu and Fujitsu Customer Use Only
·
Issue 1.1, May 2021
Release 1.0
Need help?
Do you have a question about the CFD5GRUDB3 and is the answer not in the manual?