HYDAC International FluidAqua Mobil FAM 25 Series Manual

Description
The FluidAqua Mobil FAM
25/45/60/75/95 series operates
according to the principle of vacuum
dewatering to separate free and
dissolved water as well as free and
dissolved gases from hydraulic and
lubrication fluids.
By using HYDAC bypass
filter technology, with its high
contamination retention capacity
and separation performance, the
unit achieves a very high level of
cost effectiveness.
All units have an AquaSensor AS
1000 to continuously monitor the
water content and to control the
unit. A CS 1000 particle sensor
for simultaneous monitoring of the
solid particle contamination can be
integrated optionally.
To increase the dewatering capacity,
a heater can be integrated optionally
for highly viscous fluids or for low fluid
temperatures.
The Siemens S7 series
programmable logic controller (PLC)
used in combination with a Siemens
touch control panel guarantees simple
and reliable handling in numerous
local languages.
Advantages
Extremely low residual water levels,
gas levels and particle contamination
in the operating fluids make for:
z Longer oil change intervals
z Improved component service life
z Greater machine availability
z Reduction in the life cycle cost
(LCC)
FluidAqua Mobil
FAM 25/45/60/75/95 Series
Technical specifications
Flow rates at 50 Hz
Flow rates at 60 Hz
Permitted fluids**
Sealing material
Filter size of fine filter
Filter elements of fine filter
xxx= Filtration rating
Clogging indicator
Pump type, vacuum pump
Pump type, others
Operating pressure
Permitted pressure at suction
port (without suction hose)
Permitted pressure at outlet
(without return hose) **
Operation viscosity range**
Fluid temperature range **
Ambient temperature **
Storage temperature range **
Relative humidity (ambient) **
Electrical
power consumption (50 Hz)*
Without heater
With heater
Heating output (optional)
Protection class
Length of electric cable / plug
Hoses, length
Material of hoses
Connection, inlet/outlet
Weight when empty
Achievable
residual water content
* Maximum specifications given, depends on equipment
** For other fluids, viscosities or temperature ranges, please contact us.
*** Units not suitable for "Online" and "Onload" operation (transformer in operation and connected to grid).
Polígono Industrial O Rebullón s/n. 36416 - Mos - España - rodavigo@rodavigo.com Polígono Industrial O Rebullón s/n. 36416 - Mos - España - rodavigo@rodavigo.com Polígono Industrial O Rebullón s/n. 36416 - Mos - España - rodavigo@rodavigo.com Polígono Industrial O Rebullón s/n. 36416 - Mos - España - rodavigo@rodavigo.com Polígono Industrial O Rebullón s/n. 36416 - Mos - España - rodavigo@rodavigo.com Polígono Industrial O Rebullón s/n. 36416 - Mos - España - rodavigo@rodavigo.com
+34 986 288118 +34 986 288118 +34 986 288118 +34 986 288118 +34 986 288118 +34 986 288118
FAM 25 FAM 45 FAM 60
≈ 25 l/min ≈ 45 l/min ≈ 60 l/min
≈ 30 l/min ≈ 54 l/min ≈ 72 l/min
Fluids compatible with NBR seals:
z Mineral oils to DIN 51524
z Gear oils to DIN 51517, 51524
Operating fluids compatible with FKM (FPM,Viton
z Synthetic esters (HEES) DIN 51524/2
z Vegetable oils (HETG, HTG)
z HFD fluids (not for pure phosphate ester which require
EPDM seals).
see model code
OLF-10
N10DMxxx
VM 2 C.0 VM 2 C.0 VM 2 C.0
Rotary vane
vacuum pump
Gear pumps
max. 6 bar
-0.2 to 1 bar
0 to 3.5 bar
15 ... 350 mm²/sec (without built-in heater)
15 ... 550 mm²/sec (with built-in heater)
10 ... 80°C
10 ... 40°C
10 to 50°C
Max. 90%, non-condensing
≈ 3.5 kW ≈ 4.5 kW ≈ 5.9 kW
≈ 10.5 kW ≈ 13.5 kW ≈ 19.5 kW
≈ 6.75 kW ≈ 9 kW ≈ 13.5 kW
IP 54 IP 55 IP 55
10 m / CEE (depending on the nominal voltage, see model code)
5 m (mobile FAMs only)
see model code
see table "Connection summary"
≈ 410 kg ≈ 430 kg ≈ 550 kg
< 100 ppm – hydraulic and heavy oils
< 50 ppm – turbine oils (ISO VG 32/46)
< 10 ppm – transformer oils ***
Servicio de Att. al Cliente Servicio de Att. al Cliente Servicio de Att. al Cliente Servicio de Att. al Cliente Servicio de Att. al Cliente Servicio de Att. al Cliente
FAM 75 FAM 95
≈ 75 l/min ≈ 95 l/min
≈ 90 l/min ≈ 114 l/min
) seals
®
2600
MRF 3/11/40
2600RxxxBN4HC/-KB (-V-KB)
N40FMxxx
VM 2 C.0 VM 2 C.0
Rotary vane vacuum pump or
Water ring vacuum pump
≈ 7.5 kW ≈ 7.5 kW
≈ 25.5 kW ≈ 25.5 kW
≈ 18 kW ≈ 18 kW
IP 55 IP 55
≈ 590 kg ≈ 620 kg
229