External Component Operations - JVC KW-XC777 Instructions Manual

EXTERNAL COMPONENT OPERATIONS

MP3 player, MD player, etc.
* This MP3 INPUT jack is not compatible with digital signals.
You can connect two external components to this
unit.
Connect one to the MP3 INPUT jack on the
control panel, and the other to the CD changer
jack on the rear.
Preparations:
• For connecting the Line Input Adaptor KS-U57 and
the external component, refer to the Installation/
Connection Manual (separate volume).
• Before operating the external component connected
to the CD changer jack, select the external input
correctly. (See "Selecting the external component to
use – EXT INPUT" on page 24.)
1
Select the external component.
AUX INPUT: Press TAPE/AUX repeatedly
to select the component
connected to the MP3 INPUT
jack on the control panel.
LINE INPUT: Press CD/CH repeatedly to
select the component
connected to the CD changer
jack.
• If "LINE INPUT" does not appear on the
display, see page 24 and select the external
input ("Selecting the external component to
use – EXT INPUT").
MP3
INPUT
MP3 INPUT*
2
Turn on the connected component
and start playing the source.
3
Adjust the volume.
If the input level of the external component
connected to the MP3 INPUT jack is not
high enough, increase the input level
properly.
Without adjusting the input level, you may be
surprised at a loud sound when you change
the source from the external components to
another. (See "Adjusting the auxiliary input
level – AUX ADJ" on page 24.)
180
EX
27