Assigning Names To The Sources - JVC KW-XC777 Instructions Manual

Turning the demo mode on or off
– DEMO MODE
You can turn the demo mode on or off. When
shipped from the factory, "DEMO ON" is selected.
• DEMO OFF: Turns the demo mode off.
• DEMO ON: Turns the demo mode on. The
demonstration will start
automatically if no sound comes
in for 3 minutes.
Note:
If the unit has been reset (and the power is on),
demonstration will start if no sound comes in for
about 15 seconds.

Assigning names to the sources

You can assign names to station frequencies and
the external component connected to the MP3
INPUT jack.
After assigning a name, it will appear on the
display when you select the source.
Sources
Station frequencies*
External components
("AUX INPUT" only)
* You cannot assign name to a station frequency
stored in the EX (extra) button.
1
Select a source you want to assign a
name to.
2
Press and hold SEL (select) for more
than 2 seconds while pressing DISP
(display).
(at the same time)
CONTINUED TO THE NEXT PAGE
Maximum number
of the characters
Up to 10 characters
(up to 32 station
frequencies including
both FM and AM)
Up to 10 characters
When you select a
source, the power
automatically
comes on.
Each time you press the
button, the source
changes as described on
page 7.
25