Casio fx-82ES PLUS User Manual page 6

STAT The calculator is in STAT mode.
Angular units are degrees.
Angular units are radians.
Angular units are gradients.
FIX The number of decimal places is effective.
SCI
The number of valid digits is effective.
Math
The Natural View format is selected.
Calculation history memory data is available and can be played or
there is more existing data above / below the screen.
Disp The display is just showing the intermediate result of the multi-
expression calculation.
Important: For calculations that take a long time, the display can only show the above
indicators (without any value) while the entered calculation is running internally.
Menu
Some of the calculator operations are performed from the menu. For example, pressing
MODE or HYP displays a menu of available functions.
The following operations that you should use to navigate between menus.
You can select a menu item by pressing the number key that corresponds to the
•
number on the left side of the menu screen.
Use the UP and DOWN arrows to switch between menus.
•
To close the menu without selecting anything, press AC.
•
Determining the calculation mode
To perform the following operation
General calculations
Statistical and regression calculations
Generate a table of numbers based on
an expression
Note: The initial standard calculation mode is COMP mode.
Perform these key operations:
MODE + 1 (COMP)
MODE + 2 (STAT)
MODE + 3 (TABLE)