Table of Contents
Advertisement
Available languages
Available languages
terminated with a XLR-3 female type NC3FX or equivalent at BMT side and, typically, with a 3.5 mm
EUROBLOCK at PA system side:
3
TALK LED
This LED lights when the TALK button has been pressed and the microphone is activated. This LED can be
used also to check if phantom supply is available and the base is operative.
4
TALK BUTTON
Press this button to activate the microphone and begin the.
INSTALLATION
Insert the gooseneck microphone connector in the stand XLR
1.
connector. Make sure you hear a "click" when you enter it, see
illustration.
2. Connect the call station microphone to the PA amplifier with an
XLR shielded cable.
3. Turn on phantom power on the PA amplifier for the microphone
input being used.
4. By pressing the TALK BUTTON on the microphone,
the LED turns on and you can make
announcements.
5. To remove the gooseneck microphone, hold
firmly the base, push the latch lock (see
figure) and extract the microphone.
TECHNICAL SPECIFICATION
Model
PA BMT MIC BASE
Power Supply
Phantom 48V thru XLR connector
INPUT
Microphone XLR-3 female connector
OUTPUT
Microphone XLR-3 male connector
Weight
1.2kg
Dimensions
114 x168 x 57
Compatible Mic
Gooseneck Condenser Electret Microphone
On/Off Switch
Yes
6
Advertisement
Table of Contents
