HP ESG-D Series User Manual page 523

Timeslot #
Timeslot Off On
Press this softkey to select a timeslot to be configured. Choose any of the four
timeslots. Enter the timeslot number using the front panel knob, the up and down
arrow keys, or enter the number using the numeric keypad and press the
terminator softkey.
Softkey Location: Press
,
Configure Timeslot Timeslot #
Press this softkey to toggle the active timeslot on and off. For example, to turn on
timeslot 2, select the timeslot by pressing the
menu. Enter the number 2 to make timeslot 2 active. Then turn this timeslot on by
toggling
Timeslot Off On
timeslot pattern now shows timeslot 2 turned on.
Softkey Location: Press
,
Configure Timeslot Timeslot Off On
Status after Normal Preset: On (timeslot 1), Off (timeslots 2 - 4)
SCPI Commands:
[:SOURce]:RADio:TETRa:SLOT[1]|2|3|4:STATe ON|OFF|1|0
[:SOURce]:RADio:TETRa:SLOT[1]|2|3|4:STATe?
[:SOURce]:RADio:TETRa:SLOT[1]|2|3|4:STATe ON|OFF|1|0
[:SOURce]:RADio:TETRa:SLOT[1]|2|3|4:STATe?
, ,
Mode TETRA Data Format Pattern Framed
Timeslot #
to . Notice that the visual representation of the
On
, ,
Mode TETRA Data Format Pattern Framed
Hardkey and Softkey Reference
Mode - TETRA
Enter
,
softkey in this same
,
5-387