HP ESG-D Series User Manual page 510

Goto Top Row
Modify Standard
Optimize RNYQ For EVM ACP
Hardkey and Softkey Reference
Mode - TETRA
Softkey Location: Press
,
TETRA Data Format Pattern Framed
, ,
Data User File Goto Row
Press this softkey to move the selection bar to the top row of file names in the
Goto Row menu that is accessed from the User File menu.
Softkey Location: Press
press , ,
Mode TETRA Data Format Pattern Framed
, , ,
Normal Data User File
Pressing this softkey reveals a menu of choices for modifying the standard
transmission in the following ways:
• changing the filter from root Nyquist to Nyquist
• changing the filter alpha
• changing the transmission bit rate
• changing the burst rising edge time and delay
• changing the burst falling edge time and delay
• inverting the phase polarity
Softkey Location: Press
Press this softkey to optimize the root Nyquist filter for minimized error vector
magnitude (select ) or for minimized adjacent channel power (select
EVM
The EVM selection provides the most ideal passband. The ACP selection
improves stopband rejection.
Softkey Location: Press
Optimize RNYQ For EVM ACP
Status after Normal Preset: EVM
SCPI Commands:
[:SOURce]:RADio:TETRa:CHANnel EVM|ACP
[:SOURce]:RADio:TETRa:CHANnel?
5-374
, , ,
Mode TETRA Data User File, Goto Row
,
Configure Timeslot
, , ,
Mode TETRA Data User File, Goto Row
,
Goto Row Goto Top Row
, ,
Mode TETRA (More 1 of 2)
, ,
Mode TETRA (More 1 of 2)
or press
,
Configure Up Normal
,
Goto Top Row
, ,
Configure Timeslot Configure Up
,
Modify Standard
,
Configure Hardware
,
Mode
,
or
).
ACP
,