Table of Contents
Advertisement
Sub indoor unit (backup Unit)
1 (Required) Enable the external contact control (with the installation option 02 series SEG14 - Reverse Control).
2 Connect the S-net pro2 to F1 and F2.
3 Enable the entrance control and set the mode, set temperature, and fan speed in the S-net pro2.
• Setting the sub indoor unit in the S-net pro2
a
b
c
• Operation when the external contact settings and the ETO settings overlap
Main indoor unit
Enable of entrance control
Sub indoor unit
Enable of ETO
Enable of external contact
X
X
O
O
Enable of external contact
X
X
O
a Select Control for Entering Room.
b Select the sub indoor unit.
c Set the operation mode, fan speed, and set
temperature.
X
O
Output by ETO entrance conditions
X
(temperature / time / error occurrence)
Output by ETO entrance conditions
(temperature / time / error occurrence)
O
Operation when outputting Main
X
O
On with the previous operation conditions
O
On with the entrance control enabled
Error port output
N/A
Output due to an error
N/A
English
45
Advertisement
Table of Contents
