Charging Process - CipherLab HERA51 Reference Manual

Mobile pos
Hide thumbs Also See for HERA51:
Table of Contents

Advertisement

CHARGING PROCESS

Please ensure to charge battery indoor such as a well-ventilated room between 20
30 .
Do NOT charge battery under direct sunlight.
When selecting the cell count or voltage for charging purposes, select the cell count and
voltage as it appears on the battery label. As a safety precaution, please confirm the
information printed on the battery is correct.
Lithium Polymer/Li-ion batteries has limited life cycle for charging and discharging. When life
cycle has been reached, battery may swell.
The allowed charging temperature is from 0
During discharge and handling of batteries, do not exceed 45 .
STORAGE & TRANSPORTATION
CipherLab battery is charged in manufacturing to around 30% of its full capacity. It is a good
capacity for long-term storage & transportation.
Battery should NOT be stored in full-charged or full-discharge state; otherwise it will damage
battery permanently.
Battery subjects to discharge even when not installed in a device. For any stored & un-used
battery, it is highly recommended for every 3 months to charge battery to 40%~60% of its
original capacity to prolonged storage.
Always detach battery from device if you will not use device for long period of time.
Store battery indoor temperature between 0
Do NOT store battery in temperature exceeding 50 , and never expose battery pack to high
external pressure for extended periods, which can lead to an internal short circuit and
overheating.
When transporting or temporarily storing in a vehicle, temperature range should be greater
than 0
but no more than 45 .
Storing battery at temperatures greater than 50
hours) may cause damage to battery.
to 45 .
to 30
for the best performance.
for extended periods of time (more than 2
- 7 -
Important Notices
to

Advertisement

Table of Contents
loading

Table of Contents