Table of Contents
Advertisement
HERA51 Mobile POS
4.4.1. PAIR WITH NFC ENABLED BLUETOOTH DEVICES
1) On the device you would like to pair with, make sure NFC
is enabled and Bluetooth discovery is enabled.
2) Hold the mobile POS without covering the antenna area
at the lower end of the battery.
3) Move the mobile POS in proximity with the device. A
screen notification will appear to indicate that pairing is
successful.
4.4.2. SHARE INFORMATION
1) Open the web page, video, photo or contact info page you would like to transfer.
2) Place the back of the mobile POS in close proximity with the other device you would like to
share data with.
3) When the two devices connect, a "Touch to beam" notification will appear on the screen.
4) Touch the screen to initiate data transfer.
Note:
Once the data begins to transfer, just keep the two devices in the distance within 10 m (32.8 ft.);
they no longer have to be held within close range in order to transfer successfully.
4.4.3. COMMUNICATION WITH NFC
1) On the mobile POS, launch an NFC enabled application.
2) Hold the mobile POS without covering the antenna area at the lower end of the battery.
3) Place the mobile POS close to the NFC tag or device until the application indicates data
transfer is complete.
162
Advertisement
Table of Contents
