Radio Basic Operations; Listening To The Radio - JVC KD-MX3000J Instructions Manual

RADIO BASIC OPERATIONS

Listening to the radio

When using this unit in an
area other than North or
South America:
You need to change the AM/
FM channel intervals. See
"Changing
channel intervals" on page 25.
1
FM/AM
FM1 FM2
2
SSM
To stop searching before a station is received, press the same button you have pressed
for searching.
To tune in a particular frequency without searching:
1 Press FM/AM repeatedly to select the band (FM or AM).
2 Press and hold ¢
Now you can manually change the frequehcy while "MANU" is flashing.
3 Press ¢ or 4
• If you hold down the button, the frequency keeps changing until you release the button.
Scanning broadcast stations
When you press SCAN/RND (Scan/Random) while listening to the radio, station scanning
starts. Each time a broadcast is tuned in, scanning stops for about 5 seconds ("SCAN" appears
on the display), and you can check what program is now being broadcast.
If you want to listen to that program, press the same button again to stop scanning.
6
the AM/FM
Select the band (FM1, FM2, FM3 or AM).
You can select any one of FM1, FM2, and FM3 to listen to an
FM station.
FM3 AM
To search stations
of higher
frequencies.
To search stations
of lower
frequencies.
or 4
repeatedly until the frequency you want is reached.
2
Selected band appears.
Start searching a station.
When a station is received, searching stops.
untill "MANU" starts flashing on the display.
1
SCAN/RND