Assigning Names To The Sources - JVC KD-MX3000J Instructions Manual

Assigning names to the sources

You can assign names to station frequencies, CDs and the external component connected to
the LINE IN plugs. After assigning a name, it will appear on the display when you select the
source.
Sources
Station frequencies
CDs
External component
Note:
you cannot assign a name to an MD.
7
4
1
Select a source or a station frequency you want to assign a name
to.
2
DISP
When you select a station
frequency as the source:
Ex: preset channel 1 of the FM1
band is selected as the station
frequency.
Maximum number of the characters
up to 12 characters (up to 50 station
frequencies including both FM and AM)
up to 32 characters (up to 46 discs)
up to 12 characters
5
Press and hold SEL (Select) for more than 2
SEL
seconds while pressing DISP.
When you select the
CD as the source:
2
3
When you select the external
component connected to LINE IN
as the source:
CONTINUED TO THE NEXT PAGE
29