Sound Adjustments; Adjusting The Sound - JVC KD-DV5000 Instructions Manual

Operations of this section are explained using
the buttons on the control panel unless
mentioned otherwise.

Adjusting the sound

You can adjust the sound characteristics to your
preference.
• "Vol Adj" setting is required for each source
except FM. Before starting "Vol Adj," select an
appropriate source for which you want to make
an adjustment.
1
Select the item you want to adjust.
Each time you press the button,
SEL
the adjustable items change as
follows:
Fad (Fader)
Bal (Balance)
Canceled
Note:
You can also use the SEL button on the remote
controller to call up the fader/balance
adjustment screen.
Indication To do:
Fad* Adjust the front
and rear speaker
balance.
Bal Adjust the left
and right speaker
balance.
Vol Adj Adjust and store
the input level
of each source.
* If you are using a two-speaker system, set the fader
level to "00."

SOUND ADJUSTMENTS

Vol Adj
(Volume Adjustment)
Canceled
Range
R06 (Rear only)
|
F06 (Front only)
L06 (Left only)
|
R06 (Right only)
–12 (min.)
|
+12 (max.)
2
Make adjustments.
• To adjust fader and balance—Fad, Bal:
You can make these two adjustments at
the same time, by referring to the
indication on the display.
• Press 5 (up) or ∞ (down)
to adjust the fader.
• Press ¢
to adjust the balance.
Note:
You can also use the ¢
buttons and FOLDER PRESET 5 (up) or
FOLDER PRESET ∞ (down) on the remote
controller for adjustment.
• To adjust the input level of each source
—Vol Adj:
This setting is required for each source
except FM. Before making an adjustment,
select an appropriate source for which you
want to make an adjustment.
Once you have made an adjustment, it is
memorized, and you will not need to
adjust the volume level each time you
change the source.
Adjust to match the input level to the FM
sound level.
To decrease the level
ATT
4
or
4
or
To increase the level
47