Logitech 2000 MKIII Series User Manual page 17

Variable Reluctance Magnetic Pickups
Set input type (INPUT) to standard sensitivity (STD) or high sensitivity (HS) depending on
target diameter and rotational speed. Connect the cable screen and one of the two wires from
the magnetic pickup to the common 0V terminals (shown as the black wire below). Connect
the other wire from the magnetic pickup to the input. Adjust sensitivity to ensure that the
correct value displayed at the minimum rotational speed. Either IPa or IPb can be used for
single channel operation.
Single Channel Operation
Gear Wheel or Flowmeter
Vs 0V NC NC NC NC NC 0V IPa 0V IPb
Magnetic Pickup
Screen
Dual Channel (Ratio) Operation
Gear Wheel or Flowmeter
Vs 0V NC NC NC NC NC 0V IPa 0V IPb
Magnetic Pickups
Screen
17