8.1.2.
Test Link Mode for Base Unit
Note:
(*1) When you check test mode, connect to the external Buttons because Base Unit has only LOCATOR key. Refer to Bottom
Side View (P.82).
(*2) Refer to Test Link Mode for Handset (P.43). If you can not proceed to the next step, refer to Registering a Handset to a
Base Unit (P.50).
(*3) Refer to Check Table for RF part (P.52).
(*4) Operation for regular base unit. Refer to CHART1 in the TEST RANGE Check (P.53).
(*5) for factory use only
39
KX-TG6313S/KX-TGA630S