Advertisement
PREPARATION
Before beginning the assembly of the product, make sure all parts are present.
Compare the parts with the package contents list and hardware contents list.
If any parts are missing or damaged, do not attempt to assemble the product.
Tool required for assembly (included): Allen Key.
1
Step 1 : attach support (B) to front (F) and long
bar (C).Using screw S (H6) and tighten with the
screwdriver as shown on the picture.
3
F
I
H8
C
Step 3 : attach the left side (D) and the right side (E)
to the back (A) and front part (F) by using the bolt L (H1).
Tighten with the Allen Key (H8) as shown on the picture(I).
2
B
c
Step 2 : attach support (B) to long bar (C).Then
attach it to the back (A) as shown on the picture .
Using screw S (H6) and tighten with the screwdriver.
4
Step 4 : tighten back (A) with Allen Screw S (H4) and Allen
screw L (H3) as shown on picture. Tighten with the Allen
key (H8). Put the seat (G) to the bench.
H6
H8
C
H3 + H4
Advertisement
