Hunter ECO LOGIC Instructions

Instructions AWS – Hunter model
How to use the eco-logic controller
•
Use the mode button to advance through the programming functions.
•
Use the arrows to move about the different fields within a function and the plus and minus
button to change the value that's currently flashing.
•
The PRG button is used to advance from program A to program B and program C.
Set the current date and time
•
Press the mode button on and the year will start flashing
•
Use the left and right arrow buttons to scroll through the different choices. Tapping the right
arrow button once will show the month.
•
Use the minus and plus button to change to the current month.
•
Use the right arrow button to sellect the correct day.
•
By tapping the plus (+) button you can switch to a.m./p.m. or 24-hour mode.
•
When you come back to the years that's a complete cycle. You can use the mode button to
go back to the home screen, which shows the current timer.
Set the automatic water refreshment
A program is a group of stations that share the same watering schedule. By schedule we mean
watering days of the week on which the program will run as well as the number of times the program
will cycle per watering day. If all your stations will be watering in the same days and the same
number of times a day then you can program all your stations in the same program, which we
strongly advice.