Table of Contents
Advertisement
24
EN
Menu Screen Available Using The MENU Button (cont.)
DATE/TIME
TAPE LENGTH
S TAPE
REC TIME
INT. TIME
TALLY LAMP
JLIP ID NO.
DEMO MODE
: Factory-preset
Allows you to set the current date and time (
Allows you to set the tape length depending on the tape used (
OFF
When set to "OFF", allows you to record in VHS on an S-VHS
cassette (
AUTO
This feature allows you to set the parameters for Animation and Time-Lapse
recording (
pg. 31).
This feature allows you to set the parameters for Self-Timer (
Lapse recording (
pg. 30, 31).
OFF
The tally lamp remains off at all times.
The tally lamp comes on to signal the start of recording.
ON
This number is necessary when connecting the camcorder to a device such as a computer
using the J terminal (JLIP). The numbers range from 01 to 99. Factory setting is 07.
Automatic demonstration will not take place.
OFF
Demonstrates certain functions such as Fade/Wipe, etc. When
ON
"DEMO MODE" is set to "ON" and the Menu Screen is closed,
the demonstration starts.
NOTES:
RECORDING
pg. 10).
When a tape whose Erase Protection tab is in the position that
allows recording is loaded in the camcorder, demonstration is
not available.
By turning off the camcorder or inserting a tape whose Erase
Protection tab is in the position that allows recording into it,
"DEMO MODE" is set to "OFF" automatically.
During the demonstration, all functions except zoom are
disabled.
Advanced Features (cont.)
pg. 7).
pg. 8).
pg. 30) and Time-
Advertisement
Table of Contents
