Quick Review - JVC GR-SX20EG Instructions Manual

RETAKE (R/F) Button

Quick Review

FEATURE:
PURPOSE:
To check the end of the last recording.
OPERATION:
1) Press " " and release quickly during the Record–
Standby mode.
Tape is rewound for about 2 seconds and played
back automatically, then pauses in Record–Standby
mode for the next shot.
NOTE:
Distortion may occur at the start of playback. This is
normal.
Retake
FEATURE:
PURPOSE:
To re-record certain segments.
OPERATION:
1) Make sure the camcorder is in the Record–Standby
mode.
2) Press either RETAKE to reach the start point for new
recording. Pressing "F" forwards the tape and
pressing "R" reverses it.
3) Press the Recording Start/Stop Button to start
recording.
NOTE:
Noise bars appear and pictures may become
monochrome or darken during Retake. This is normal.
15
EN