Define Function Keys - MSI CellScale 3750CS User Manual

MEASUREMENT
To Define the Function Keys
Note: It is possible to program a function to more than one function key. For example, to prevent anyone from turning off Auto Total, F3 could be changed to be
"VIEW ∑". Therefore both F3 and F4 would show the Total weight.
1) Push SETUP. First the LCD will display the SETUP
Screen
2) Push SETUP again. The first setup menu item is
"KEY FCTN".
In this example we'll change the function of the UNITS key (F5) to
"SETPOINT".
3) Push ENTER. You are now in the KEY FUNCTION
Menu. The LCD reads "ASSGN F1".
4) Push the DOWN Scroll key to change to "ASSGN
F5".
5) Push ENTER. The current Function Key selection
is shown.
6) Use the UP/DOWN keys to scroll through all
the functions that F5 key can be set to. Stop on
"SETPOINT".
If you hold down the scroll key it will start to increment automatically.
7) Push ENTER to assign the SETPOINT function
to F2. The display shows the menu item "ASSGN
F5".
8) Push EXIT (SETUP) twice to return to normal
scale operation, or assign another Function key
using steps 3-6.
Software V1-15 to 1-20
SYSTEMS INTERNATIONAL
1
KEY FCTN
2
ASSGN F1
3
ASSGN F5
4
UNITS
5
TOTAL
6
TEST
STRING2
STRING1
STATS
SETPOINT
6
ASSGN F5
7
8
®
MSI-9000 CellScale System • 3750CS User Guide Page 25