Install Manual Feed Tray - G&G GG5S-33S1-X1 User Manual

4. Raise the output tray to avoid the printed paper from slipping and falling, or immediately
remove the printed document after the printing is complete.
Note：
• It is recommended that you raise the output tray to prevent the paper from slipping
and falling after printing. If you choose not to raise the output tray, we recommend
that you immediately remove the printed paper from the printer.
• If more than 250 pages (80 g/m²) are put inside the auto feed tray at one time,
paper jam or paper feed failure will be led to.
• If carrying out single-sided printing, please make sure that the side to be printed
(the blank side) is face down.

2.3.2. Install manual feed tray

1. Raise the output tray to avoid the printed paper from slipping and falling, or immediately
remove the printed document after the printing is complete.
13