Table of Contents
Advertisement
USING YOUR SMART AIR PURIFIER (CONT.)
Indicator
Color
Percentage Range
Blue
Green
Orange
Red
Note:
•
The air purifier will take 5 seconds
to detect the air quality each time it
is turned on. During this time, the air
quality indicator rings will be blue. After
5 seconds, the air quality indicator
rings will change color based on the
detected air quality.
•
Auto Mode does not use the Turbo
Mode.
•
The VeSync app also supports ECO
Auto Mode (see page 14).
Air Information
Your air purifier automatically scans your air
and analyzes the quality. By default, the air
purifier shows the overall clean air percentage
on the center of the display.
1.
Tap
to change the air quality
information shown on the center of the
display.
2. Keep tapping
quality readings for PM1.0, PM2.5, PM10,
and overall clean air percentage. For more
information, see PM Values (page 11).
3.
When you stop tapping
current air quality reading will stay on the
display until you restart the air purifier.
If you restart the air purifier, the display
will again show the overall clean air
percentage.
Air Quality Indicator Chart
Clean Air
Quality
90 –100%
Very Good
80–89%
70 –79%
Moderate
0 –69%
to cycle through air
, the
Air
Auto Mode
Fan Speed
Sleep Mode
Good
Low
Medium
Bad
High
Clean Air Percentage
Clean air percentage is an estimated
measurement of the amount of clean air in the
room, between 0% (bad) to 100% (very good).
This percentage is calculated by an algorithm,
based on:
•
The concentration of particles detected in the
air, including micro-particles.
•
The change in detected particles in the air
during purification.
Note: The percentage is approximate. The
sensor can only detect airborne particles, not
odors or gasses.
PM Values
"PM" stands for "Particulate Matter," and usually
refers to airborne particles floating in your air,
including dust and most allergens. Many of
these particles are too small to be seen with
the naked eye, and without air purification,
they stay in the air much longer than heavier
or larger particles.
Your air purifier's AirSight Plus 2.0 Laser
Dust Sensor detects the amount of airborne
particles that are in a given space (µg/m³).
Generally, the lower the number, the better
your air quality.
11
Advertisement
Table of Contents
