1. Manuals
  2. Brands
  3. Sunsky Manuals
  4. GPS
  5. G4
  6. Manual

Sunsky G4 Manual

Gps speed meter
Hide thumbs
1
2
3
4
Table of Contents

Advertisement

Quick Links

Download this manual
GPS Speed meter: G4

Warning:

This product working voltage is 5V, and it is forbidden to use a voltage higher than 5V for
power supply.
After the satellite is found, the GPS light stops flashing and stays on for normal use.

Display functions:

1. Satellite icon: After the satellite is found, the GPS light stops flashing and stays on for normal use.
2. Vehicle speed display
3. Ambient light: speed changes over 20
4. Compass: N (North) E (East) W (West) S (South)
5. Speed unit: KM/H (kilometers) MPH (miles)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the G4 and is the answer not in the manual?

Questions and answers

Related Manuals for Sunsky G4

Summary of Contents for Sunsky G4

  • Page 1 GPS Speed meter: G4 Warning: This product working voltage is 5V, and it is forbidden to use a voltage higher than 5V for power supply. After the satellite is found, the GPS light stops flashing and stays on for normal use.
  • Page 2 Wave button function 1.Short press in: confirm the option after entering the setting menu 2.long press in: enter the setting, after adjusting, press vertically for 2 seconds to save and exit 3.Push left: move options after entering setting (switch to compact mode) 4.Long push left: push left for 2 seconds to turn off the buzzer alarm, do it again to turn on 5.Push right: move option after entering setting (change ambient light color) Enter setting mode:...
  • Page 3 Over speed When the vehicle 30-250 alarm speed reach to 150, HUD will give the alarm Fatigue 1.0-8.0 HUD will give fatigue driving driving alarm each 4 alarm hours Brightness 0=automatic 0-11 adjustment sensitivity adjustment 1-11=manual adjustment 1=darkest, 11=brightest 1→11 is increasing Speed unit 0=KM/H (kilometers) 1=MPH (miles)
  • Page 4 2.Without car Speed After HUD power-on, the satellite icon flashes will start to find the satellite. Please driving the car to the road. It will work after it stops flashing. 3.Inaccurate Speed a.First check the speed unit is correct or not, the speed unit including KM/H and MPH, please refer to the setting to switch the unit.

Table of Contents