Viewfinder Adjustment; Shoulder Strap Attachment; Tripod Mounting - JVC GR-DVL9200EK Instructions Manual

Diopter Adjustment Control
PAUSE
2
1

Viewfinder Adjustment

1
2
3
Power
Switch

Shoulder Strap Attachment

1
3

Tripod Mounting

1
CAUTION:
When using a tripod, be sure to open and extend
its legs fully to stabilise the camcorder. To
prevent damage to the unit caused by falling
over, do not use a small-sized tripod.
Set the Power Switch to "5S", "
pressing down the Lock Button located on the switch.
Pull out the viewfinder fully and adjust it manually for
best viewability.
Slide the Diopter Adjustment Control until the
indications in the viewfinder are clearly focused.
Following the illustration, thread the strap through the
1
eyelet , then fold it back and thread it through the
2
buckle . Repeat the procedure to attach the other
end of the strap to the other eyelet
the strap is not twisted.
Align the screw and camera direction stud on the
tripod with the camera's mounting socket and stud
hole. Then tighten the screw.
•Some tripods are not equipped with studs.
11
EN
" or " " while
3 , making sure