Operating Instructions - Toto Air Bath ABA756 Owner's Manual

Hide thumbs

Table of Contents

Available languages

1) Fill the Bath with Water

Fill the tub to your preference.

NOTE: Be careful not to overfill the bath as the water level will rise when the bather enters the bath.

2) Turn the Air Massage On

Press the ON/OFF button on the keypad to begin the Air Massage.

The intensity level is marked by a small "n" and a number on the display.

NOTE: The massive begins on intensity level 3 ("n-3") or your previous

setting.

3) Change Massage Intensity

Press the +/- button to cycle through the massage intensities. The

Normal mode intensities cycle as follows:

n-3 > 4 > 5 > 4 > 3 > 2 > 1 > 2 > 3

4) Change Massage Modes

Press the Mode button to change between the massage modes. The

modes cycle in the following way:

Normal > Oscillate > Pulse > Normal

NO TE: The controller is designed to shut the blower off after 20 minutes

of continuous running. To restart the blower, press the On/Off button.

Massage Mode 1: Oscillating Massage Mode (OSC):

Oscillating mode gradually cycles through the

intensity settings giving a wave-like, soothing

massage.

To Activate: Press the LED button

• Pressing the LED button again will turn the light off.

Changing the Chromotherapy Mode

• The first press will turn the light on, the second will turn it off, the

third within 2 seconds will start the light in the next mode, etc.

• Chromotherapy modes: Slow Spectrum, Fast Spectrum, Slow

Random Color, Fast Random Color, High Speed Random (color

flashes), Blue-Green Fade, Pure White, Pink, Lavender, Light Blue,

Dark Blue, Light Green, and Dark Green.